To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

From Wikipedia, the free encyclopedia

Bachmann knot
NamesBachmann knot, Bachman knot
CategoryHitch
RelatedPrusik knot, Klemheist knot, Blake's hitch
Typical useMountaineering

The Bachmann hitch (sometimes misspelled 'Bachman') is a friction hitch, named after the Austrian alpinist Franz Bachmann.[1] It is useful when the friction hitch needs to be reset quickly or often or made to be self-tending as in crevasse and self-rescue. (See Prusik knot)

The Bachmann hitch requires the use of a carabiner. It does not matter if the carabiner is locking or not. Most importantly, the carabiner must be of round cross section for friction. Grabbing hold of the carabiner will release the friction and allow the hitch to slide freely and thus be moved appropriately. To remove the Bachmann hitch, just unclip the top loop, hold on to the carabiner and pull the cord free.

This knot is frequently tied using a sling made from 1" tubular webbing. In this case wrap the webbing 3 times around the rope (this means the carabiner gate must be opened 3 times in the tying of the knot) for normal (dry) applications. There are a limited number of applications that involve repeated shock loads to the knot and in these 4 wraps are usually sufficient.

However, with a non-locking carabiner it is safer to use the knot with the carabiner gate opening facing down (opposite to what is shown in the picture). This decreases the risk of self-unclipping: at maximum, one twist goes off. Otherwise, the whole knot may fail.

It is important for safety reasons to mention that the rope used for the friction hitch should be smaller in diameter than the tension rope. This allows for movement when resetting the hitch position but when a large load is applied to the friction hitch, the hitch locks on to the tension rope. If two ropes of the same diameter are used for the friction hitch and tension rope, the hitch may move freely like a slip knot (lasso or noose) and not lock into place. When encircling any cylindrical object, most ropes can only be tightened to a diameter slightly greater than the ropes own diameter(USMC Assault Climber Course).

YouTube Encyclopedic

  • 1/3
    Views:
    170 954
    41 382
    33 745
  • Ascend a Wet or Icy Climbing Rope with the Bachmann Knot - ITS Knot of the Week HD
  • Haul and Hoist with the Klemheist Knot - ITS Knot of the Week HD
  • Creating Your Own Ladder with Tubular Webbing - ITS Knot of the Week HD

Transcription

References

  1. ^ Luebben, Craig (2011). Knots for Climbers. Rowman & Littlefield. ISBN 978-0-7627-6858-5.

See also

External links

This page was last edited on 22 April 2024, at 19:50
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.