To install click the Add extension button. That's it.

The source code for the WIKI 2 extension is being checked by specialists of the Mozilla Foundation, Google, and Apple. You could also do it yourself at any point in time.

4,5
Kelly Slayton
Congratulations on this excellent venture… what a great idea!
Alexander Grigorievskiy
I use WIKI 2 every day and almost forgot how the original Wikipedia looks like.
Live Statistics
English Articles
Improved in 24 Hours
Added in 24 Hours
Languages
Recent
Show all languages
What we do. Every page goes through several hundred of perfecting techniques; in live mode. Quite the same Wikipedia. Just better.
.
Leo
Newton
Brights
Milds

Ben Chifley Dam

From Wikipedia, the free encyclopedia

Chifley Dam
Ben Chifley Dam
Location of the Ben Chifley Dam
in New South Wales
Official nameBen Chifley Dam
CountryAustralia
LocationCentral West, New South Wales
Coordinates33°33′22″S 149°38′12″E / 33.55611°S 149.63667°E / -33.55611; 149.63667
PurposeWater supply
StatusOperational
Construction began1948
Opening date1956
Operator(s)Bathurst Regional Council
Dam and spillways
Type of damEmbankment dam
ImpoundsCampbells River
Height34.4 metres (113 ft)
Length455 metres (1,493 ft)
Width (base)104 metres (341 ft)
SpillwaysTwo
Spillway typeConcrete side channel spillways, with a six bay auxiliary spillway
Spillway capacity9,800 cubic metres per second (350,000 cu ft/s)
Reservoir
CreatesChifley Dam
Total capacity30,800 megalitres (1,090×10^6 cu ft)
Active capacity26,000 megalitres (920×10^6 cu ft)
Inactive capacity4,800 megalitres (170×10^6 cu ft)
Catchment area960 square kilometres (370 sq mi)
Surface area2.2 hectares (5.4 acres)
Website
www.bathurst.nsw.gov.au

Ben Chifley Dam, or Chifley Dam, is a rock and earth-fill embankment dam across the Campbells River in the central west region of New South Wales, Australia. The main purpose of the dam is to supply potable water to the city of Bathurst.

The dam is named in honour of Ben Chifley, a former Prime Minister of Australia, Member for Macquarie and resident of Bathurst.

Location and features

The dam is located 17 kilometres (11 mi) upstream of Bathurst. Water is released into the Campbells River which flows into the Macquarie River before being captured at the water treatment facility at Gorman's Hill, a suburb of Bathurst.

The dam wall is 34.4 metres (113 ft) high and 455 metres (1,493 ft) long and holds back 30,800 megalitres (1,090×10^6 cu ft) of water when at full capacity. The surface area of the reservoir is 2.2 hectares (5.4 acres) and the catchment area is 960 square kilometres (370 sq mi).[1] The 455 metres (1,493 ft) long uncontrolled side-channel concrete spillway and six plug auxiliary fuse plug spillway[2] has a discharge capacity of 9,800 cubic metres per second (350,000 cu ft/s).[1] With an average daily inflow of around 35 megalitres (1.2×10^6 cu ft) per day, as at April 2013, filtered water consumption averaged 18.9 megalitres (670×10^3 cu ft), with a further 8.4 megalitres (300×10^3 cu ft) of treated water returned to the Macquarie River.[3]

History

Construction of Ben Chifley Dam started in 1948 and was completed eight years later. It was officially opened by the Premier of New South Wales, Joseph Cahill on 10 November 1956.[2] The dam then succeeded Winburndale Dam as the potable-water supply for Bathurst. Winburndale Dam had been built in 1934 with an expected life of 20 years. Since completion of Ben Chifley Dam, Winburndale has been used to supply raw water for park watering and industrial use.

Plans to upgrade the Ben Chifley Dam commenced in 1989 after it was realised it did not meet the New South Wales Dam Safety Committee's safety recommendations and could fail in the event of a severe flood. A flood in August 1998, the worst recorded in 175 years, caused water to run over the spillway at a depth of 2.74 metres (9.0 ft), just 0.1 metres (0.33 ft) below the level at which the wall was expected to fail. An evacuation plan was implemented downstream.[4]

Construction to upgrade the dam started in 1999. The top of the wall was raised by 5.4 metres (18 ft) and the spillway was extended by 30 metres (98 ft), increasing the dam's capacity from 16,000 megalitres (570×10^6 cu ft) to 30,800 megalitres (1,090×10^6 cu ft).

Gallery

See also

References

  1. ^ a b "Register of Large Dams in Australia". Dams information. The Australian National Committee on Large Dams Incorporated. 2010. Archived from the original (Excel (requires download)) on 12 December 2013. Retrieved 24 April 2013.
  2. ^ a b "Chifley Dam – General Information". Environment: Water. Bathurst Regional Council. Archived from the original on 21 April 2013. Retrieved 11 April 2013.
  3. ^ "Chifley Dam details". Environment: Water. Bathurst Regional Council. 9 April 2013. Archived from the original on 21 April 2013. Retrieved 11 April 2013.
  4. ^ AG.EMADDB.Public.Website Archived 6 July 2011 at the Wayback Machine

External links

This page was last edited on 23 September 2023, at 05:12
Basis of this page is in Wikipedia. Text is available under the CC BY-SA 3.0 Unported License. Non-text media are available under their specified licenses. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. WIKI 2 is an independent company and has no affiliation with Wikimedia Foundation.