Matthew E. Welsh
Bridge | |
|---|---|
 | |
| Coordinates | 38°01′01.52″N 86°11′49.69″W / 38.0170889°N 86.1971361°W |
| Carries | 2 lanes of  KY 313 and  SR 135 |
| Crosses | Ohio River |
| Locale | Brandenburg, Kentucky and Mauckport, Indiana |
| Maintained by | Indiana Department of Transportation |
| Characteristics | |
| Design | Cantilever bridge |
| Total length | 3,098 ft (944 m) |
| Longest span | 221 m |
| History | |
| Construction start | August 1964 |
| Opened | November 19, 1966 |
| Location | |
 | |
Matthew E. Welsh Bridge is a two-lane, single-pier cantilever bridge[1] on the Ohio River. The bridge connects Kentucky Route 313 and Indiana State Road 135, as well as the communities of Brandenburg, Kentucky and Mauckport, Indiana.
It is 3,098 ft (944 m) long and was built at a cost of 5.5 million dollars, financed mainly by the State of Indiana. The truss portion of the bridge is continuous across two 725 ft (221 m) spans. Construction of the bridge began in August 1964 and the bridge was opened to traffic on November 19, 1966.
The bridge was named after Matthew E. Welsh, the 41st governor of Indiana.
Although 90% of the bridge is within the Commonwealth of Kentucky, it is owned and maintained by the State of Indiana.
-
The Matthew E. Welsh Bridge, as seen from the landing in Brandenburg, Kentucky
-
Distance view of bridge from Indiana side
-
Different view of underside of bridge
-
View of the bridge from Brandenburg on a clear day
Footnotes
- ^ Durkee, Jackson, "World's Longest Bridge Spans", National Steel Bridge Alliance, May 24, 1999
See also
Further reading
- Matthew E. Walsh Bridge at Bridges & Tunnels
Bridges of the Ohio River | ||||
|---|---|---|---|---|
| ||||
This page was last edited on 9 February 2023, at 04:06