In heraldry and vexillology, a pale is a charge consisting of a band running vertically down the centre of a shield or flag.[1] Writers broadly agree that the width of the pale ranges from about one-fifth to about one-third of the width of the shield, but this width is not fixed. A narrow pale is more likely if it is uncharged, that is, if it does not have other objects placed on it. If charged, the pale is typically wider to allow room for the objects depicted there.[1]
The pale is one of the ordinaries in heraldry, along with the bend, chevron, fess, and chief. There are several other ordinaries and sub-ordinaries.[1]
The word pale originally referred to a picket (a piece of wood much taller than it is wide such as is used to build a picket fence) and it is from the resemblance to this that the heraldic pale derives its name[2] (see 'pale', English: Etymology 2 on Wiktionary).
Derived terms
- pallet
- In British heraldry when two or more pales appear on a field, they are conventionally termed pallets. While a pallet is generally classified as a diminutive of the pale, the pallets on a shield of two pallets may be no narrower than the pale on another where it has been narrowed to accommodate other charges on either side.[1][3]
- paly
- A shield with numerous pales may be termed paly, especially in early heraldry, though this term is now properly reserved to describe a variation of the field.[1][3]
- in pale
- In pale refers to the appearance of several items on the shield being lined up in the direction of a pale.[3]
- palewise
- A charge palewise is vertical like a pale.[3]
- party per pale
- A shield party per pale is divided into two parts by a single line which runs in the direction of a pale.[3]
Special cases
A pale may be couped ("cut off" at either end, and so not reaching the top or bottom of the shield).[3] The special term in Canadian heraldry for a couped pale is "a pale retrait" (this also applies to pallets; see below). If couped at the bottom it is blazoned as "a pale retrait in base".[4]
The Canadian pale, invented by George Stanley for the flag of Canada, occupies fully half the field. On a 1:2 flag such as Canada's, it is square. The name was suggested by Sir Conrad Swan, and used when Elizabeth II proclaimed the new flag on 28 January 1965.[5]
References
- ^ a b c d e Fox-Davies, Arthur Charles (1904). The Art of Heraldry: An Encyclopedia of Armory. London: T.C. & E.C. Jack – via Internet Archive.
- ^ Webster, Noah; Walkers, John; Goodrich, Chauncey A. (1853). "Pale". An American Dictionary of the English Language. New York: Harper & brothers. p. 710.
- ^ a b c d e f Gough, Henry; Parker, James (1894). A Glossary of Terms Used in Heraldry (New ed.). Oxford and London: J. Parker and Co. p. 112.
- ^ "Canadian Heraldic Dictionary". www.heraldry.ca. Retrieved 31 December 2023.
- ^ Kibbe, Stephen, ed. (September 2006). "Did you know...?" (PDF). The Seaxe (PDF). Middlesex Heraldry Society (52): 12. This in turn credits A King in Canada, by Conrad Swan, pp. 242–247.
| Types | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Topics | |||||||||||||||
| Achievement | |||||||||||||||
| Charges | |||||||||||||||
| Tinctures |
| ||||||||||||||
| Applications | |||||||||||||||
| Related | |||||||||||||||
| |||||||||||||||
This page was last edited on 13 February 2024, at 10:07